The Bean SchoolShop Artisan Bean(opens in a new tab)

Reference

Glossary

The words that turn up on coffee bags, in café conversation and in the guides on this site, defined in plain English. Terms are grouped by subject rather than alphabetically, because most of them only make sense next to their neighbours: growing and processing, roast, brewing, and tasting and trade.

70 terms · About 10 minutes

None of this is jargon for its own sake. A bag that says “Ethiopia, washed, 1,900 m, heirloom” is using four of these words to tell you what the coffee will taste like, and every one of them means something specific. Where a definition depends on another term, that term is linked underneath it.

If you want the longer version of any of these, the guides go into the mechanics properly. This page is for when you meet a word and want to know what it means in a sentence or two.

01

Growing and processing

The plant, the fruit, and the steps that turn a picked cherry into a stable green bean ready to roast.

Read the full Origins & Regions guide →

Anaerobic

A processing style where coffee is fermented in a sealed tank with the oxygen excluded, usually with the temperature and pressure controlled, for anything from a day to a week or more. It tends to produce bold, fruity, sometimes boozy or spicy flavours, and a bag labelled this way is telling you the flavour was substantially made in a tank rather than on the farm.

See also: Fermentation, Natural process, Washed process

Arabica

Coffea arabica, the species that makes up the majority of the world's coffee and most of what this site is about: aromatic, relatively low in caffeine, and fussy about altitude, temperature and disease. It originated in the Ethiopian highlands and is usually grown between roughly 900 and 2,000 metres.

See also: Robusta, Varietal, Shade-grown

Coffee cherry

The fruit of the coffee shrub, a small round cherry that ripens from green through yellow to deep red, and contains two seeds — the beans. Everything called processing is about getting those seeds out of the fruit and dried without spoiling them.

See also: Green coffee, Parchment, Mucilage

Fermentation

The controlled breakdown of the sugars and mucilage around the seed by yeasts and bacteria, either as a step in washing or deliberately extended in sealed tanks. It is where a lot of fruit and sweetness in coffee comes from, and where a lot of faults do too: too much, too warm or too long and the cup turns vinegary or medicinal.

See also: Washed process, Anaerobic, Mucilage

Decaffeination

Removing most of the caffeine from green coffee before it is roasted, either with water, with carbon dioxide or with a solvent. The name on the bag — Swiss Water, CO2, sugar cane — describes which route was used, and none of them removes all of it: “99.9% caffeine-free” is measured against what was in the bean, not a claim that the cup contains none.

See also: Green coffee, Robusta, Roast date

Go deeper: Decaf: the processes, and what they cost in flavour →

Green coffee

Roasted coffee's raw material: the dried, sorted seed before any heat is applied, hard, dense, blue-green to pale brown, and smelling of hay. It keeps for months in a sack and tastes of almost nothing until it is roasted.

See also: Parchment, Roast date, First crack

Honey process

A middle route between washed and natural: the skin and pulp are removed but some or all of the sticky mucilage is left on the seed to dry, giving a rounder, sweeter cup with more body than washed and less ferment than natural. The labels white, yellow, red and black honey loosely indicate how much mucilage was left on and how dark it dried.

See also: Washed process, Natural process, Mucilage

Landrace (heirloom)

A local, long-established population of coffee plants that has adapted to a place rather than being bred and named by a breeder. Ethiopian bags often say “heirloom”, which is honest shorthand for “a local variety we have not identified” — and part of why Ethiopian coffee tastes unlike anything grown from a single named cultivar.

See also: Varietal, Arabica

Mucilage

The sticky, sugar- and pectin-rich layer between the cherry's skin and the parchment around the seed. How much of it is left on during drying is the main difference between washed, honey and natural processing.

See also: Washed process, Honey process, Natural process

Natural process

Drying the whole cherry in the sun, fruit and all, for two to four weeks before hulling everything off at once. The seed spends that time in contact with fermenting fruit and takes on the character: heavier body, deeper sweetness, berry and sometimes wine-like flavours, and usually less acidity than a washed coffee.

See also: Washed process, Honey process, Fermentation

Parchment

The papery layer that sits directly around the seed, inside the mucilage. Washed coffee is dried and shipped in its parchment and hulled later; wet-hulled coffee has the parchment stripped off while the bean is still wet, which is what makes Sumatran coffee taste the way it does.

See also: Mucilage, Wet-hulled (giling basah), Green coffee

Peaberry

A single, round seed that forms inside a cherry when only one of the usual two develops, instead of the flat-sided pair. It is sorted out and sold separately — PB in Kenya, caracol in Spanish-speaking countries — and some drinkers claim it tastes sweeter or rounder, though that is asserted more often than demonstrated.

See also: Screen size, Coffee cherry

Pulped natural

A Brazilian method, sometimes called semi-washed, where the skin is removed and the seed is dried with the mucilage still on but without fermenting in a tank first. It sits between washed and natural in the cup: sweet, nutty, low in acidity, with more body than washed.

See also: Honey process, Natural process, Washed process

Robusta

Coffea canephora, the second commercial species: hardier than arabica, grown hotter and lower, higher yielding and carrying roughly twice the caffeine. In the cup it is heavier, more bitter and less aromatic, which is why it appears in cheap blends, instant coffee and Italian espresso blends where it adds body and crema.

See also: Arabica, Crema

Go deeper: Coffee and your body: caffeine by method →

Screen size

The grade a bean gets from the sieve it passed through, measured in 64ths of an inch — so Kenya's AA is a large screen, AB a smaller one. It is a size grade, not a quality score: a well-processed smaller bean often drinks better than an indifferent large one.

See also: Peaberry, Varietal

Shade-grown

Coffee grown under a canopy of taller trees rather than in open sun, which moderates midday heat, holds moisture and slows ripening. It is common in Ethiopia, Colombia and Central America and is generally good for the environment, but it is not a certification and not automatically better coffee — too much still air under a dense canopy encourages fungal disease.

See also: Arabica, Coffee cherry

Varietal

A named cultivated variety of the coffee plant, such as Bourbon, Typica, Caturra or Kenya's SL28 — the plant equivalent of a grape variety. Varietal matters because different ones ripen differently, resist disease differently and taste different, though the same varietal grown in two places will not taste the same.

See also: Landrace (heirloom), Arabica, Screen size

Washed process

Stripping the skin and pulp off on the day of picking, fermenting the seeds in tanks for roughly 12 to 36 hours, washing off the remaining mucilage, then drying them clean. Washed coffees are clean and transparent, showing the farm's acidity, florals and fruit clearly — which is why most high-quality Kenyan, Ethiopian, Colombian and Central American coffee is washed.

See also: Natural process, Honey process, Fermentation, Washing station

Washing station

The small facility where a village's or cooperative's cherries are pulped, fermented, washed and dried, often by a farmer on a plot of a fraction of a hectare. The station's name on a bag matters as much as the country, because its sorting and drying decide much of the cup.

See also: Washed process, Micro-lot, Cooperative

Wet-hulled (giling basah)

The Indonesian method where the parchment is removed while the bean is still swollen with water, at around 30 to 35 per cent moisture, and the bare seed is dried afterwards. It gives the dark blue-green raw bean and the earthy, herbal, low-acid, syrupy cup that Sumatra is known for.

See also: Parchment, Natural process, Green coffee

02

Roast

The few minutes of heat that turn a grassy seed into something you recognise, and the words roasters use to describe the path it took.

Read the full Roasts guide →

Agtron

The scale a roast colour meter reports on, used across the trade so that “medium” means the same thing from one roaster to another. It measures where the roast ended, not how it got there, so two coffees the same Agtron number can still taste quite different.

See also: Roast curve, Development time

Baked

A roast fault caused by too little heat or too slow a finish: the coffee comes out flat, papery and dull, with the acidity and fruit gone and nothing replacing them. It is the opposite failure to underdeveloped, and no brewing adjustment fixes it.

See also: Underdeveloped, Scorched, Roast curve

Chaff

The papery silver skin that flakes off the beans during roasting. Roasters remove it because it smoulders and tastes papery, and it is the pale fleck you sometimes find in a bag of ground coffee.

See also: First crack, Green coffee

Degassing

The slow release of carbon dioxide that roasting trapped inside the bean, which continues for days to weeks afterwards. It is why fresh coffee foams when water hits it, why a bag has a one-way valve, and why coffee a few days off roast behaves differently from coffee a month old.

See also: Bloom, Roast date, Second crack

Go deeper: Storing coffee: degassing and freshness →

Development time

The stretch of the roast after first crack, where the balance of acidity, sweetness and body is set. Too short and the coffee is underdeveloped — grassy and sour; too long or too slow and it is baked and flat. Roasters often express it as a percentage of total roast time.

See also: First crack, Underdeveloped, Baked, Roast curve

First crack

The audible pop, like popcorn or rice crisps, at roughly 196 to 205 °C bean temperature, when steam and gas force their way out and the beans visibly swell. It marks the point where the roast becomes drinkable, and light roasts are dropped just after it.

See also: Second crack, Development time, Light roast

Light roast

A roast dropped just after first crack, before second begins. It is the most transparent style — high acidity, floral and fruit notes, a lighter body — and the least forgiving: pushed too far it tastes grassy and sour rather than bright.

See also: First crack, Medium roast, Dark roast, Underdeveloped

Go deeper: Coffee myths: is light roast under-roasted? →

Medium roast

A roast finished between the end of first crack and the start of second, where acidity and sweetness are in proportion and the origin is still audible. It is the widest, safest band and works in almost any brewer, which is why so much coffee is designed around it.

See also: Light roast, Dark roast, Second crack

Dark roast

A roast taken into or through second crack, when the bean surface turns oily and the flavours in the cup are largely products of heat: dark chocolate, toast, smoke, sometimes tar. It shows the roaster rather than the farm, and it is why commodity coffee is roasted this way.

See also: Second crack, Medium roast, Roast date

Go deeper: Coffee myths: dark roast and caffeine →

Omni roast

A single roast sold as suitable for both filter and espresso. It is a real convenience and a real compromise: a roast developed enough to extract well under pressure is usually darker than a filter brewer would choose.

See also: Development time, Dark roast

Quaker

An unripe or immature bean that never developed its sugars, so it stays pale and straw-coloured through the roast while the rest of the batch browns. It tastes papery and peanutty, which is why roasters pick them out, and a scattering of them in a bag is a sign of loose sorting.

See also: Defect, Coffee cherry, Roast date

Roast curve

The record of how the bean temperature rose through the roast — how fast it climbed, how long it spent in each phase, whether it was still climbing at the end. Two roasts can end at the same colour and taste completely different because their curves were different.

See also: Development time, Agtron, Baked

Roast date

The date the coffee was roasted, printed on the bag. It is the most useful thing on the label, because roasted coffee is perishable and its good window is measured in weeks; a best-before date a year away tells you when it becomes unpalatable, not when it is good.

See also: Degassing, Dark roast

Go deeper: Storing coffee: how long a bag stays good →

Scorched

Burnt by too much heat too early in the roast, which chars the outside of the bean while the inside is still raw. The cup tastes smoky, ashy or metallic, and you will sometimes see dark tips or burnt edges on the beans themselves.

See also: Roast curve, Baked, Underdeveloped

Second crack

The quieter, faster crackling at around 225 °C, more like a bowl of cereal settling, which marks the start of the dark end of the spectrum as the bean's structure begins to break down. Past it the bean is closer to being burned than roasted.

See also: First crack, Dark roast, Development time

Underdeveloped

A roast fault where the outside is coloured but the inside has not caught up, usually because development after first crack was too short. It tastes sour, grassy, astringent and sometimes peanutty, and it does not improve with a finer grind or hotter water.

See also: Development time, Baked, Scorched

03

Brewing

The handful of variables that decide whether a cup tastes thin, sour, bitter or sweet — and the words used to describe them.

Read the full Brewing guide →

Alkalinity

Water's capacity to buffer, or neutralise, acidity — not the same thing as pH, and the number that most often explains a dull, chalky, muted cup. High-alkalinity water flattens a bright coffee; the usual target for brewing is low, around 40 ppm.

See also: Water hardness, Acidity

Go deeper: Water: alkalinity and why it flattens coffee →

Bloom

The bubbling and swelling that happens when hot water first hits fresh grounds, as the carbon dioxide trapped in the roast escapes. Pour-over recipes pour a small amount, wait 30 to 45 seconds and let it settle, so the rest of the water passes through evenly instead of being pushed around by gas.

See also: Degassing, Channeling, Grind size

Brew ratio

The weight of coffee relative to the weight of water, usually written as 1:16 or similar. For filter coffee the working range is about 1:15 to 1:17; espresso is around 1:2 in to out. Changing the ratio changes how strong the cup is, not how well it is brewed.

See also: Dose, Yield, Strength, Extraction

Burr grinder

A grinder that crushes beans between two abrasive surfaces to a relatively even particle size, rather than chopping them with blades. It is the single upgrade that improves home coffee most, because an uneven grind over-extracts the fine particles and under-extracts the coarse ones at the same time.

See also: Grind size, Fines, Extraction

Channeling

When water finds a path of least resistance through a bed of coffee and rushes through it, leaving the rest barely touched. The result is a shot or a pour that runs fast and tastes sour and thin, with sudden bitter notes from the part that was over-extracted.

See also: Puck, Extraction, Grind size

Go deeper: Espresso at home →

Crema

The tan foam on top of an espresso, an emulsion of coffee oils and carbon dioxide created by brewing under pressure. It is a sign that the coffee is fresh and that pressure was applied, not a sign of quality — a stale or badly dialled-in shot can still produce plenty of it, and robusta produces more than arabica.

See also: Espresso, Degassing, Robusta

Go deeper: Coffee myths: crema as a sign of quality →

Dose

The weight of dry coffee that goes into the brewer — 15 g in a pour-over, 18 g in a double espresso basket. Fixing the dose and weighing it is the first step of any repeatable recipe, because a spoonful can vary by fifty per cent.

See also: Brew ratio, Yield, Extraction

Extraction

How much of the coffee has dissolved into the water. Too little gives sourness, saltiness and a thin body, because the acids come out first; too much gives bitterness, dryness and astringency, because the bitter compounds come out last. Sweetness sits in the middle, and that is what you are aiming for.

See also: Under-extraction, Over-extraction, TDS, Strength

Go deeper: Water: what the water is doing during extraction →

Espresso

A brewing method that forces water through a packed bed of fine coffee at around nine bar, producing a small, strong, concentrated cup with a layer of foam. It needs a machine and a good grinder, and it is by far the most equipment-sensitive way to make coffee.

See also: Crema, Puck, Dose, Yield

Go deeper: Espresso at home →

Fines

The dust-fine particles every grind produces, and the ones a blade grinder produces far too many of. They extract fast and can slip through a metal filter or clog a paper one, which is why they cause both muddiness and stalled brews.

See also: Grind size, Burr grinder, Channeling

Grind size

How fine the coffee is ground, from icing-sugar powder for espresso to sea salt for French press. It is the biggest lever you have over extraction and the first thing to change when a cup tastes wrong, because smaller pieces give up their flavour faster.

See also: Extraction, Burr grinder, Fines, Bloom

Over-extraction

Brewing too much out of the coffee, usually from too fine a grind, water that is too hot, or too long a contact time. It tastes bitter, drying and astringent, with a hollow middle, and the fix is to extract less rather than to add more coffee.

See also: Extraction, Under-extraction, Grind size

Puck

The compressed bed of coffee left in an espresso machine's basket after a shot. How evenly it is distributed and tamped decides whether water passes through it evenly or channels through one weak spot.

See also: Channeling, Espresso

Go deeper: Espresso at home →

Strength

How concentrated the finished cup is, measured as a percentage of dissolved coffee solids. It is a separate thing from extraction: a cup can be strong and under-extracted, or weak and over-extracted, and the two need opposite fixes.

See also: TDS, Extraction, Brew ratio

TDS

Total dissolved solids: the percentage of the brewed liquid that is dissolved coffee rather than water, measured with a refractometer. Filter coffee usually lands around 1.15 to 1.45 per cent; you do not need to measure it at home to brew well, but it is what separates strength from extraction on paper.

See also: Strength, Extraction, Brew ratio

Go deeper: Water: TDS, and what a TDS pen can tell you →

Under-extraction

Brewing too little out of the coffee, usually from too coarse a grind, water that is too cool, or too short a contact time. It tastes sour, salty and thin with a quick finish; grind finer, use hotter water or brew longer, one change at a time.

See also: Extraction, Over-extraction, Grind size

Water hardness

The mineral content of water, mainly calcium and magnesium, usually given in ppm. Around 50 to 150 ppm suits brewing: too soft and the cup tastes flat and hollow, too hard and it turns dull and chalky and scales up your kettle.

See also: Alkalinity, Extraction

Go deeper: Water: hardness, softness and the middle band →

Yield

The weight of brewed coffee you get out, as opposed to the dose you put in. An espresso recipe is written as dose to yield — 18 g in, 36 g out — and weighing the output is the only way to know whether a shot is actually consistent.

See also: Dose, Brew ratio, Espresso

Go deeper: Espresso at home →

04

Tasting and trade

How the trade assesses coffee, and the vocabulary used to describe what is in the cup.

Read the full How to taste guide →

Acidity

In coffee tasting, a positive word for the bright, lively, fruity impression a coffee gives — the quality a Kenyan has in quantity and a Brazilian has little of. It is not the same as sourness, which is a brewing fault, though the two are easy to confuse.

See also: Under-extraction, Body, Finish

Go deeper: How to taste: acidity, the most misunderstood word →

Blend

Two or more coffees sold together, usually to make a stable, balanced cup that tastes the same every time — the opposite of what a single origin is for. A good blend is not a lesser thing, but it will not teach you what a region tastes like.

See also: Single origin, Commodity coffee, Roast curve

Body

The tactile weight of the coffee in your mouth — thin and tea-like at one end, syrupy and heavy at the other. It comes from the beans and the brew method more than the roast: a French press of the same coffee feels heavier than a paper-filtered pour-over.

See also: Acidity, Finish, Grind size

Go deeper: How to taste: body, the weight of it →

Commodity coffee

Coffee traded in bulk as a generic ingredient, graded for defects rather than for character, and usually roasted dark so it tastes consistent whatever went into it. The phrase is descriptive rather than an insult: most of the world's coffee is bought and sold this way.

See also: Specialty coffee, Blend, Dark roast

Cooperative

A farmer-owned organisation that collects, processes and sells its members' coffee, common where farms are too small to own machinery or reach buyers alone. The co-op or washing station named on a bag is often the most useful traceability you will get.

See also: Washing station, Micro-lot, Direct trade

Cupping

The trade's standard way of tasting coffee: a fixed dose and grind, water just off the boil, steeped in a wide cup, then the crust of grounds broken and the liquid slurped from a spoon. It exists so that coffees can be compared on equal terms rather than on how someone happens to brew at home.

See also: Score, Q grader, Tasting notes

Go deeper: How to taste: what to actually do with a cup →

Score

The number a coffee is given out of 100 on the standard cupping form, adding up assessments of sweetness, acidity, body, flavour, balance and so on. In the trade, 80 and above is conventionally treated as specialty — a convention, not a law, and not a guarantee that you will prefer the coffee.

See also: Cupping, Specialty coffee, Q grader

Defect

A fault in the green coffee or the cup: mould, phenol, potato, ferment, over-fermentation, insect damage and the like. A few defects are tolerated in commodity coffee and essentially none in specialty, which is one of the clearest practical differences between the two.

See also: Quaker, Specialty coffee, Commodity coffee

Direct trade

A roaster buying straight from a farm, washing station or co-op rather than through an importer, usually with a longer relationship and a price above the commodity market. It has no legal definition and no single certification, so what it means in practice depends entirely on the roaster using it.

See also: Cooperative, Commodity coffee, Micro-lot

Finish

What the coffee leaves behind after you swallow — how long the flavour lingers, and whether it stays sweet or turns dry and bitter. A long, clean finish is one of the marks of a well-processed, well-roasted coffee.

See also: Body, Acidity, Cupping

Go deeper: How to taste: the finish, and why it matters →

Micro-lot

A small, separately processed and traceable batch — often one day's pick, one section of a farm, or one experimental fermentation — kept apart from the rest of the harvest because it turned out distinctive. There is no fixed weight: it means the coffee was small enough and good enough to be sold on its own.

See also: Washing station, Cooperative, Single origin, Anaerobic

Q grader

Someone certified by the Coffee Quality Institute to score coffee using the standard cupping protocol, having passed tests on taste, aroma and defect detection. It is the trade's qualification for judging coffee consistently, and a licensed Q grader is who signs off a cupping score.

See also: Cupping, Score, SCA

SCA

The Specialty Coffee Association, the trade body that publishes the standard cupping form, the cupping protocol and the water standards most of the industry quotes. When a guide cites a brewing target or a 100-point score, it is usually the SCA's convention being referred to.

See also: Cupping, Score, Water hardness

Single origin

Coffee from one place — a country, a region, a farm or a single lot — sold on its own rather than blended. It is what you buy if you want to taste where a coffee came from, though “single origin” can mean anything from a whole country to a few sacks from one hillside.

See also: Micro-lot, Blend, Varietal

Specialty coffee

Coffee that has been grown, processed, roasted and brewed with the aim of showing its character, and that scores 80 or above on the trade's 100-point scale with essentially no defects. The term is a trade convention rather than a regulated label, and plenty of good coffee sits outside it.

See also: Commodity coffee, Score, Defect

Tasting notes

The flavours a roaster says the coffee reminds them of — jasmine, blackcurrant, milk chocolate. They describe what the coffee is like rather than what has been added to it, and they are a prompt for your own tasting rather than an instruction about what you must taste.

See also: Cupping, Acidity, Finish

Go deeper: How to taste: does the flavour wheel help? →

Back to the home page — or read Start here, Origins & Regions, Roasts and Brewing, or the two guides on espresso at home and coffee myths, plus how to taste and coffee and your body.