Most of these have the same two moves near the top: change the grind, then change the water temperature. That is because most taste faults are extraction, and Brewing's section on reading the cup explains why — this page does not repeat it. What this page adds is the order to try things in, and the causes that no amount of adjusting will fix.
So work from cheap to expensive. Rule out the things that touch the coffee before you touch the recipe: an old bag, a dirty brewer, water that tastes of chlorine. Then change one thing per cup. If a change makes no difference at all, you have probably changed the wrong thing, and it is worth going back to the list rather than changing two more.
Fault 01
Why is my coffee bitter?
Almost always over-extraction: too much has dissolved out of the grounds, and the compounds that taste bitter are the last to arrive. The exceptions are a dark roast, an old bag, or a dirty brewer — none of which a grind setting will fix.
What is probably going on
- Over-extraction — grind too fine, water too hot, or the brew running longer than it should.
- A dark roast. Roasting further produces toast, smoke and ashy flavours, and most people taste those as bitterness.
- Old coffee. Staling takes the sweetness first and leaves the bitterness, so a stale bag tastes flat and bitter at once.
- A dirty brewer. Oils left in a machine, a press or a pod holder go rancid, and they taste bitter in a way no recipe can correct.
- Robusta. Blends with a high proportion of robusta are more bitter and more astringent than arabica, by nature of the species.
What to try, in this order
- 1.Clean the brewer properly, then taste again. It costs nothing and rules out the one cause you cannot adjust away.
- 2.Grind one step coarser. This is the single biggest lever, and it is easy to undo.
- 3.Cool the water. Just off the boil for filter; around 90–92 °C if you are brewing a dark roast.
- 4.Shorten the brew — less time in a French press, a faster finish on a pour-over, less stirring.
- 5.If it is still bitter at a coarse grind, stop adjusting. Go back to the bean.
If it is an espresso shot
A bitter shot is over-extracted in the same way: grind coarser first, then shorten the ratio, then drop the brew temperature if the machine allows it. Espresso at home covers dialling in properly.
The bean, not the method
If the cup is bitter and flat, with none of the sweetness you would expect, the coffee is the likelier cause: dark-roasted, old, or robusta-heavy. The tell is a cup that stays bitter as you coarsen the grind and gets thin before it gets sweeter — that is the roast, not your technique.
The explanation behind this: Brewing › Reading the cup, for why over-extraction tastes bitter.
Fault 02
Why is my coffee sour?
Usually under-extraction: the acids come out of the grounds first, so a cup that was brewed too fast, too cool or too coarse tastes sour and thin. It is also the fault people most often blame on the bean and least often caused by it.
What is probably going on
- Under-extraction — grind too coarse, water too cool, brew too short, or too little agitation.
- A light roast brewed on a dark-roast recipe. Light beans are denser and give up their flavour more slowly, so the same recipe extracts less.
- Water that is too soft, distilled or heavily filtered, which makes coffee taste sour and hollow because there is little in the water to carry the flavour.
- A genuinely acidic coffee. Washed Kenyan and Ethiopian beans, and high-grown coffees generally, are sharp and fruity by design.
- A grinder producing an uneven grind, so the fine part over-extracts and the coarse part under-extracts at the same time.
What to try, in this order
- 1.Grind finer, one step at a time. This fixes most sour cups.
- 2.Use hotter water — just off the boil, not boiled and left for five minutes.
- 3.Brew for longer, or stir more, so the water reaches more of the coffee.
- 4.Try a bottle of low-mineral bottled water once, as an experiment. If the fruit comes back, your water was the problem.
- 5.If it is still sour at a fine grind, change the coffee rather than the recipe.
If it is an espresso shot
A sour shot is the most common complaint from a new machine, and the fix is the same on every machine: grind finer first, then check the dose and the yield before touching anything else. Espresso at home takes it from there.
The bean, not the method
Sourness that is clean and fruity, in a cup with some sweetness and body behind it, is the coffee doing what the bag promised — acidity is a quality in coffee, not a defect. Sourness that is sharp, salty or vinegary, with a thin body and a quick finish, is a brewing fault. A very light roast needs a finer grind and hotter water than a medium one, so it is not the bean's fault if you brewed it like a medium.
The explanation behind this: Brewing › Reading the cup, on under-extraction and why the acids come out first.
Fault 03
Why is my coffee watery?
Two different faults get called watery: not enough coffee for the water, which is strength, and not enough flavour pulled out of the coffee, which is extraction. They need opposite fixes, so decide which one you have before changing anything.
What is probably going on
- Too little coffee for the amount of water — often a scoop rather than a weight, since a scoop of light roast weighs less than a scoop of dark.
- Under-extraction, usually too coarse a grind, which gives a thin cup that is also sour.
- Water that is too soft or distilled, which leaves the cup hollow rather than thin.
- Stale or pre-ground coffee, which has lost the compounds that give a cup weight and sweetness.
- A drip machine that brews below about 90 °C, which is common on cheap machines and produces a thin, sour cup however you set it up.
What to try, in this order
- 1.Weigh both the coffee and the water. Around 60 g per litre is the usual starting point; 66 g per litre for a stronger cup.
- 2.If the cup is weak but pleasant, add coffee. That is the whole fix, and no other change is needed.
- 3.If the cup is weak and sour, grind finer instead — more coffee in a thin cup just makes a strong thin cup.
- 4.Check the water. If your tap is very soft or heavily filtered, try a low-mineral bottled water once.
- 5.If the machine itself is brewing cool, that is a machine problem rather than a recipe problem; a hotter machine or a different brewer is the only fix.
The bean, not the method
Strength is a choice; body is the bean. Washed light roasts from high altitudes are tea-like and light-bodied by design, and adding more of one gives you a strong delicate coffee, not a syrupy one. If you want weight in the cup, look for natural-process coffees, Brazilian or Sumatran beans, or a darker roast — those are the beans that carry body.
The explanation behind this: Brewing › Reading the cup, on the difference between strength and extraction.
Fault 04
Why does my coffee taste burnt?
Either the coffee is roasted dark, in which case toast and smoke are the roast doing its job, or something is cooking it: water that is too hot, a pot left on a hotplate, or over-extraction pulling out ashy flavours.
What is probably going on
- A dark roast. French and Italian roasts are roasted until the bean's own sugars are nearly gone, which reads as dark chocolate, toast and smoke — and, drunk black, sometimes as ash.
- Water that is too hot for the roast. Dark beans are porous and give up their flavour easily, so near-boiling water scalds them.
- Over-extraction, which produces an ashy, drying finish on top of the bitterness.
- Coffee held hot. A pot on a hotplate or in a flask for an hour tastes stewed first and burnt afterwards.
- A dirty brewer, where old oils and burnt-on residue sit in the path of the water.
- A roast defect. A batch can be scorched or baked in the drum and taste ashy even at a medium colour — unusual, but real.
What to try, in this order
- 1.Take it off the heat. Turn off the hotplate or warm function, and drink what you brew rather than holding it.
- 2.Cool the water to around 88–92 °C for a dark roast; light roasts want it hotter, dark roasts do not.
- 3.Grind coarser, so less of the roast's ashy tail-end dissolves into the cup.
- 4.Shorten the brew, particularly in a French press or a moka pot, where time and heat both keep working.
- 5.Clean the brewer, then taste again.
- 6.If it is still burnt and the beans are dark and shiny, the answer is a lighter roast.
The bean, not the method
A dark roast is supposed to taste of the roast — that is the style, not a fault, and no recipe turns it into a light one. If the burnt taste is the part you dislike, buy a medium roast and keep everything else the same. But if a medium roast tastes ashy, that is worth taking back to the shop: it is more likely a roast problem than a brewing one.
The explanation behind this: Brewing › Reading the cup, on over-extraction and the ashy finish.
Fault 05
Why does my coffee taste like soap?
There is no single established cause for this one, so treat the list below as suspects rather than a diagnosis. Unlike bitter and sour, soapy is not an extraction fault — which is why the first things to check are the things that touch the coffee, not the recipe.
What is probably going on
- Residue. Washing-up liquid or rinse aid left in a cup, a jug or a press is the simplest explanation and the most often overlooked.
- A new brewer or machine, where manufacturing residue in plastic, silicone or a water tank can taint the first few brews.
- Water. Heavy chlorine or chloramine reads soapy or medicinal to some drinkers, and a filter cartridge past its life can add to it.
- A badly rinsed milk jug or steam wand, if there is milk anywhere in the drink.
- The coffee itself. Some floral, perfumed coffees — certain naturals, and coffees with lavender or geranium-like aromatics — are described as soapy by some drinkers and as floral by others. Both reactions are genuine.
What to try, in this order
- 1.Rinse everything in plain hot water — cup, jug, press, the machine's tank — and brew again. No detergent.
- 2.Brew one cup with bottled water. If the soapiness goes, your water or your filter is the cause.
- 3.Try a different bag, keeping the same water and the same equipment. That isolates the coffee in one cup.
- 4.If the brewer is new, run plain water through it several times as the instructions say, then taste again.
- 5.If it survives all of that, clean the machine properly with a coffee cleaner — old residue can carry odd tastes that a rinse will not shift.
The bean, not the method
Probably not the bean, but not certainly not. A genuinely soapy taint in roasted coffee is unusual; a perfumed coffee that one person calls soapy and another calls jasmine is common, and it is a matter of what you are reminded of rather than a fault. The useful test is whether the taste follows one bag and not the next with everything else unchanged — if it does, the coffee is the only thing that was different.
The explanation behind this: Brewing › Reading the cup, for the extraction faults this is not.
Fault 06
Why is my coffee oily?
Shiny beans mean a dark roast, or beans that have been in the bag a while — the roast breaks down the bean's structure and its own oils come to the surface. It is not spoilage and there is nothing to fix, but it does tell you what is in the bag.
What is probably going on
- Roast level. The longer a coffee is roasted, the more its cell walls break down and the more of its own oils reach the surface; a dark roast can be visibly glossy within days.
- Age. Oils migrate as beans sit, so a bag that was matte when it was roasted can be shiny weeks later.
- The bean. Some coffees simply carry more oil than others, which is why two roasts at the same level can look different.
- Not a fault at all: an oily texture in the cup is body, and a rich, buttery mouthfeel is a quality in many coffees rather than a problem.
What to try, in this order
- 1.Nothing, if the coffee still tastes good. Oily beans are normal and not a sign that the bag has gone off.
- 2.Taste before you blame it. If the cup is flat and papery as well as oily, the bag is old — buy smaller amounts and drink them sooner.
- 3.Wipe the grinder's hopper and burrs occasionally, because oily beans leave a film that clings and can go rancid.
- 4.Keep the bag sealed and in a cupboard, not the fridge, where condensation makes it worse.
- 5.If you dislike the shine or the roast taste, buy medium or light roasts, where the oils mostly stay inside the bean.
The bean, not the method
This one is the bean and not the method. Nothing at the brewing stage puts oil on the outside of a bean, and nothing you do removes it. If you meant an oily feel in the cup rather than shiny beans, that is body — a quality in Sumatran and natural Brazilian coffees and in espresso, not a fault.
The explanation behind this: Roasts, on what roast level does to the bean.
07
When nothing works
If you have been through the list and the cup is still wrong, stop adjusting and change one of the four things underneath it: the beans, the water, the grinder, or the brewer. Fresh beans and filtered water fix more bad cups than any recipe, and they are the two cheapest things to rule out.
The most useful habit is to keep one bag you know well and brew it the same way while you change one variable at a time. Two cups side by side teach faster than any amount of reading — How to taste explains how to set that up. And a fault you can describe precisely (sour and thin, or bitter and drying) is already half solved, because it tells you which direction to move in.
Back to the home page — or read Brewing for extraction and the starting recipes, Espresso at home for the shot faults specifically, Roasts for what the roast itself is doing to the cup, and Water for the faults that start in the tap.
